Extension for Module 3:

Extension 3.1: Pascal's Triangle (3 points)

Authors

Robert Sedgewick (book)

Take a look at the Wikipedia page on Pascal's Triangle. We will implement this using a two-dimensional array, so it may be easier to imagine the entries left-justified rather than in triangular form:

        column
        0  1  2  3  4
row
0       1
1       1  1
2       1  2  1
3       1  3  3  1
4       1  4  6  4  1
        .
        .
        .

Viewed as a two-dimensional array, the computation is specified as follows, for each entry at row r and column c:

  • If c is 0, then the entry is 1.
  • If c==r, then the entry is 1.
  • If r<0 or c<0 or c>r, then the entry is 0 and is not shown.
  • Everywhere else, the entry is computed as the sum of the entries at:
    • r-1,c
    • r-1,c-1

Procedure

  1. Open the PascalsTriangle class, found in the arrays package of the extensions folder.

  2. Insert code to obtain from the user the value N which is the number of rows you should compute of the triangle.

  3. Instantiate the two-dimensional array needed to hold the results.

    Java lets you do this as a ragged array, where each row can be of a different length.

    You are welcome to instantiate the array that way, but it is simpler and equally acceptable to instantiate the array with the same number of columns in each row. Java syntax for that is much simpler. An example of this appears in SelfAvoidingWalk, found in the book.ch1 package of the book source folder in your repositories.

  4. Compute the triangle as a two-dimensional array and print the results left-justified as shown above.

  5. For extra fun, try to print the triangle centered as shown on the Wikipedia page.

Submitting your work

To submit your work, contact the instructor or a TA. They will walk you through the submission process. Be prepared to show them the work that you have done and answer their questions about it!

Extension 3.2: Birthday Problem (5 points)

Procedure

To make things simple, let's assume that all months have 31 days.

  1. Open the Birthday class, found in the arrays package of the extensions folder.

  2. Insert code to obtain from the user the number of people N that will enter the room.

  3. For each person, randomly generate a month and day on which that person was born.

  4. Using a two-dimensional array that is indexed by month and by day, keep track of the number of people born on that month and day.

    For example, perhaps you randomly decide the person was born in month 4 and day 28.

  5. After processing all of the N people, iterate over your array to compute:

    • For each month, the fraction (or percentage) of people born in that month.

    • The average of the 12 values you computed for the above.

    • For each day, the fraction (or percentage) of people born on that day, whether in the same or in a different month.

    • The average of the 31 values you computed for the above.

    • The fraction (or percentage) of people born on exactly the same day.

Be careful! A 1 entry means just one person was born on that particular day. You are looking for the fraction of people who share a birthday with at least one other person.

Submitting your work

To submit your work, contact the instructor or a TA. They will walk you through the submission process. Be prepared to show them the work that you have done and answer their questions about it!

Extension 3.3: GC Content (2 points)

Authors

Ron K. Cytron

Computer science plays a large role in modern biology. BioJava is a framework for working with biological data. It provides a framework for using sequences and performing common biology functions. In this extension you will be reading in a DNA sequence and computing its GC-Content(http://en.wikipedia.org/wiki/GC-content).

Notes

  • You can find the Java files for this extension in the extensions source folder.

    Locate the following files in the biojavagc package: * GCContent.java is the file you complete. When you run it, analysis is performed on four genomes and the results are printed as output.

    • GCContentTest.java is a unit test for your work. You will receive credit for this extension only if this test passes.
  • You can do this extension by following the instructions below. However, you might want to take some time to familiarize yourself with the BioJava website.
    Of special importance is the BioJava Cookbook. The cookbook has information and examples for performing common tasks. You may also find the BioJava API helpful.

  • You will be working with some DNA sequences, represented in the FASTA format, which you can find in the genomes folder of your workspace:

    • NC_002677.fasta
    • mysterya.fasta
    • mysteryb.fasta
    • mysteryc.fasta

    As you might guess from their names, there is an air of mystery surrounding some of these genomes.

    Consider a bacterium and a phage that might be hosted by that bacterium. It turns out that the DNA of the host and of the phage often need to be similar in terms of their GC content for the bacterium to play host to the phage:

    Most bacteriophage and other bacteria are lower in GC content than Salmonella and its relatives, so invading DNA is an obvious target for H-NS. "It's like a primitive immune system," says Fang. "Reduce their expression, and the foreign genes can be tolerated."

    From http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2064161/

    In other words, if the GC content in the bacterium and phage is dissimilar, the bacterium may be immune to infection by the phage.

Procedure

  1. Complete the method percentGC in GCContent.

    Note: BioJava already has a function to get the GC-count (number of G and C nucleotides) of a sequence.

    Do not use this function.

    Instead, devise a way to iterate through the array of characters (representing nucleotides) yourself.

  2. Run the unit test GCContentTest and make sure it passes.

    Most students' code fails when given a string with no DNA in it whatsover (an empty string or "". Its GC content is 0%.

Submitting your work

To submit your work, contact the instructor or a TA. They will walk you through the submission process. Be prepared to show them the work that you have done and answer their questions about it!

Extension 3.4: Reading Frame of a Sequence (10 points)

Authors

Ron K. Cytron

Sequences of nucleotides can be read as sequences of nucleotide triplets, known as codons. This means there are 3 different ways of reading a nucleotide sequence.
One starts with the first nucleotide in the sequence, one starts with the second, and one starting with the third, as shown below:

Image from https://wikispaces.psu.edu/display/Biol230WFall09/Protein+Translation

  • The sequences shown above are RNA. The corresponding DNA sequences would have a T everywhere you see a U.

  • Reading frame 1 begins at the first nucleotide. Interpreting AGT using the genetic code, Serine would be generated as the first amino acid of the resulting protein, if this is the proper reading frame.

  • However, if the reading frame should start one base later, then the first DNA triple is GTC, which encodes Valine.

  • Finally, if the reading frame should start two bases later, then the first DNA triple is TCT, which encodes Serine. While this protein begins with the same amino acid as in reading frame 1, the next amino acid is different, as shown in the above figure.

  • There is no other reading frame of interest. If we considered a reading frame that begins at the fourth nucleotide, that is the same as if the frame began at the first nucleotide.

  • Important: In the picture above, the reading frames are denoted 1, 2, or 3. Keeping with computer science custom, you must compute these as 0, 1, or 2. The unit test will not work if you fail to follow this convention!

How do we determine which reading frame is correct? Our approach is based on the following observations, which are somewhat simplified to suit our purposes. The interested student is encouraged to take Bio 2960 for a much more thorough and revealing treatment of this material.

  • Protein translation is initiated only by a special sequence of 3 nucleotides called a start codon.

  • Translation continues until a stop codon is encountered, which is also a specially designated sequence of 3 DNA nucleotides.

    Note that it is the first stop codon that ends the translation.
    While the translated region could contain other start codons, which translate as the amino acid methionine, any stop codon encounered after the start codon ends the translation process.

  • If we scan random DNA, we expect each of the four bases (A, T, C, G) to occur with probability 1 in 4.

  • If we look for two specific bases, one after the other, in random DNA, scanning pairs a time, we expect the two bases to occur with probability 1 in 16 (1 in 4 times 1 in 4).

  • If we scan DNA looking for a specific triplet, moving 3 bases each time we look, we expect that given triplet to occur with probability 1 in 64 (1 in 4 times 1 in 4 times 1 in 4).

    For example, we expect the start codon to occur with probability 1 in 64.

  • Because there are three possible stop codons, the probability in random DNA that a given triplet is one of the three stop codons is 3 in 64, which is approximately 1 in 20.

  • This means that if DNA is random, a protein sequence would be about 20 amino acids in length, once its start codon is found.

  • It turns out that proteins are much longer than that, say at least 60 amino acids in length.

  • If we start in the wrong reading frame, the DNA should appear to us as random, and we should obtain very short amino acid chains by translation.

Thus, the best reading frame for a sequence of DNA is the offset at which translation would produce the longest chain of amino acids. The DNA sequence that produces that chain begins with the start codon. The start codon and all subsequent codons are interpreted in groups of 3 bases. The sequence contains no stop codon until the end of the translated region. In other words, the translated region may contain multiple start codons in the middle (which are translated as the amino acid methionine), but the region contains no stop codons in the middle.

Your task in this extension is to analyze a sequence of DNA to determine its best reading frame.

Notes

You can find the Java files for this extension in the extensions source folder.

Locate the following files in the biofindframe package:

  • FindTheFrame.java is the file you complete.

  • FindTheFrameTest.java is a unit test for your work.

    You will receive credit for this extension if this test (usually) passes.

  • You will be working with some DNA sequences, represented in the FASTA format, which you can find in the genomes folder of your workspace.

Procedure

  1. The code given to you prompts the user for a genome DNA file, and then reads that file into a char array using methods provided by bioJava.

    If you are uncertain about char arrays, this would be a good time to review the relevant material in your text and in the lecture notes.

  2. Your work takes place in the method bestReadingFrame. Open that file now and take a look at what is provided.

    There are comments in that file to direct your work, which consists of the steps described below.

    You should read these instructions and the comments carefully before you begin. Solutions that fail to follow the instructions will receive no credit!

  3. First, define 3 char arrays, one for each of the possible stop codons: ochre, amber, and opal.

  4. Next, define a char array named methionine for the start codon.

    The most common start codon is Methionine, which is encoded by the DNA sequence AUG. For the purposes of this extension, Methionine is the only start codon you will consider.

    More information about start and stop codons can be found here.

  5. The rest of the code you write will attempt to read the DNA in each of the possible 3 reading frames. Find the best reading frame and return the index at which that best reading frame occurs. Thus, your method will return a value as follows:

    1. 0, if reading frame 1 is the right answer. That frame begins at index 0 of the dna array you are given.

    2. 1, if reading frame 2 is the right answer. That frame begins at index 1 of the dna array you are given.

    3. 2, if reading frame 3 is the right answer. That frame begins at index 2 of the dna array you are given.

    4. -1 if no reading frame exists at all

Hint: Scan the DNA one base a time, looking for the longest coding sequence that begins at that base. A coding sequence begins with a start codon and ends at the next stop codon that is found by scanning triplets.

Based on the index at which the longest coding sequence occurs, compute the corresponding reading frame (0, 1, or 2). That is the value you want to return.

Submitting your work

To submit your work, contact the instructor or a TA. They will walk you through the submission process. Be prepared to show them the work that you have done and answer their questions about it!

Extension 3.5: Data Sorting and Analysis (5 points)

Authors
Brennan Morell
Jarett Gross

A big part of Computer Science revolves around finding ways to sort data to be organized in a useful manner. There are many different algorithms that computer scientists use to sort information. You can learn about a few popular ones below:

For the purposes of this assignment, we will implement our sorting using a naive process of repeatedly selecting the smallest value from a data set of type int[], and swapping it to the front of the collection. In computer science, this is called a Selection Sort.

Procedure

  1. Open the Sorting class, found in the arrays package of the extensions folder.

  2. Prompt the user for the size of the collection

    If the user enters a negative number, continue to prompt them with a useful message until they enter a positive number.

  3. Continue to prompt the user to input numbers one at a time, using an array to store the input data.

  4. After processing all of the numbers entered, the data will be sorted using the following naive algorithm:

    • Create an int sortCount to keep track of the number of times you've scanned the data >
    • Create an outer loop to limit the number of scans to be equal to the size of the collection (while(sortCount < size))

    • Create an inner loop to iterate over the unsorted portion of the array, each time selecting the minimum value (keep track of this value and its index in the array)

      The unsorted portion will always be the sub-array with indexes sortCount to size inclusive.

    • Swap this minimum value with the value currently at the head of the unsorted portion of the array

    • At this point, sortCount should be incremented to reflect the new unsorted portion of the array.

  5. After the sorting the data, we will take advantage of its useful organization to compute the following statistics:

    Mean: The simple average of the data.

    Median: The middle value in the ordered dataset (Note: How does this computation vary for even and odd sized datasets?)

    Min: The smallest value in the ordered dataset.

    Max: The largest value in the ordered dataset.

    Range: The difference between the maximum and minimum values of the data set.

  6. Finally, arrange for your output to display the sorted dataset and accompanying statistics in the following manner:

     1 2 3 4 5 
    	
     Mean: 3.0
    	
     Median: 3.0
    	
     Min: 1
    	
     Max: 5
    	
     Range: 4
    

Submitting your work

To submit your work, contact the instructor or a TA. They will walk you through the submission process. Be prepared to show them the work that you have done and answer their questions about it!

Extension 3.6: Blackjack! (7 points)

Authors
Nathan Vogt

Introduction

In this assignment, we create the game blackjack, the most widely played casino banking game in the world. In blackjack, each player plays against the dealer, not the other players. The goal of blackjack is to beat the dealer by attaining a score (the sum of the values of your cards) higher than the dealer's score without exceeding 21. Also, many casinos use an 8 deck shoe (meaning eight 52 card decks shuffled together). This practice prevents players from counting cards.

Background

  • For this implementation, there is a dealer, one human player, and p autonomous players.

  • Everyone is initially dealt a two card hand

    • All players' cards are visible to all players and the dealer. The dealer, however, has only his or her second-dealt card showing at this point.

    • The value of a hand is the sum of that hand's cards' values. A card's value is determined as follows:

      • If the card's rank is between 2 and 9, then the card's value is its rank. Thus, the 4 of Diamonds is worth 4 points.

      • A face card is worth 10 points. Thus, the King of Spades is worth 10 points.

      • An ace is worth 11 points. Thus, the Ace of Hearts is worth 11 points.

  • After the initial deal is complete, the dealer turns to the first player (which will be you, the human), and asks if you want to hit or stand.

hit
means that you take one more card. The value of that card is then added to the value of your hand. If you still have 21 points or fewer, the dealer will continue to ask if you want to hit. The dealer will not move on to another player until you stand or have busted. If by hitting you have exceeded 21 points, you have busted and you have lost your bet to the dealer. The dealer moves on to the next player.
stand
means that you do not want any more cards. Your play in this round is complete. The dealer moves on to the next player.
  • The dealer then moves to the next player using the above protocol.

  • When the last player has finished interacting with the dealer, the dealer then performs the following steps:

    • The dealer's hidden card is revealed.

    • The dealer continues to hit until the dealer's hand's value is 17 or higher, or the dealer has busted.

  • If the dealer busted, then all players who did not previously bust win against the dealer.

  • If the dealer did not bust, then all players whose hands have value in excess of the dealer's hand's value win against the dealer.

  • All players whose hands have value less than the dealer's hand's value lose to the dealer.

  • A player whose hand's value equals the dealer's hand's value has pushed, and has neither won nor lost money.

Procedure

  1. Prompt the user for how many autonomous players, p, to have at the table, and how many games to play.

  2. Create a new array to keep track of everyone's scores, including yourself and the dealer.

  3. Construct a loop that will simulate the number of games to be played. Hint: We will have to reset each player's score between games.

  4. Next, create a mechanism that simulates the initial deal of two cards to each player. We must simulate drawing a random card. Because the suit of the card is not important for this game, we can think of the deck as only 13 possible cards with equal likelihood of being drawn. Use randomness to draw a card and then calculate its value.

    Remember that cards 2-9 will count as their number, 10-King all count as 10, and Aces count as 11.

  5. Verify that the array stores each player's score correctly. A player's score must be the sum of both cards drawn.

  6. Now we've reached the decision moment in blackjack. Each player decides whether to hit or stand. Start with the human player.

    Prompt the human player for their move. In order to make this decision, the human player should be able to see their score and the dealer's face-up card. In addition, after each hit, the human player should see their updated score.

  7. Once the human player is finished (either by stand, bust, or blackjack), simulate the autonomous players and then the dealer.

    The dealer follows the casino rule to hit until his score equals 17 or higher and then stand. Let's assume that the autonomous players follow the same rule. You can copy and paste the same game mechanics you used earlier to draw cards.

  8. After the dealer finishes his turn, print out the results of that game. Reminder: if a player busts, then they lose. If the dealer busts, all the players that did not bust win. If neither busts, players with a higher score than the dealer win and players with a lower score lose. If a player's score equals the dealer's (non-bust), then it is a tie, called a push.

    • What was the final score of each player and the dealer?

    • Which players won?

    • Which players busted?

    • Did any players get a blackjack?

    • Did any players push?

  9. After all the games have ended, print out the percentage of the games that the human won.

  10. Here is a sample solution. In this implementation, player 0 is the dealer, player 1 is the human player, and players 2 and 3 are autonomous players. Notice that the human player got three blackjacks out of four games! This is very rare.

You chose to play 4 games
There are 2 autonomous players playing.

Game 1
The dealer's face-up card has the value of 10
The players' scores are: 
21 18 12 
The Dealer's face-up card has the value of 10. And your current count is 21
You chose to stand!

Player 0 got 20
Player 1 got Blackjack! (21)
 Player 1 beats the dealer!
Player 2 got 18
Player 3 got 20
 Player 3 pushed with 20

Game 2
The dealer's face-up card has the value of 8
The players' scores are: 
15 17 16 
The Dealer's face-up card has the value of 8. And your current count is 15
You hit!

Player 0 got 19
Player 1 Busts! 26
Player 2 got 17
Player 3 Busts! 23

Game 3
The dealer's face-up card has the value of 9
The players' scores are: 
15 14 15 
The Dealer's face-up card has the value of 9. And your current count is 15
You hit!
The Dealer's face-up card has the value of 9. And your current count is 21
Would you like to hit?
You chose to stand!

Player 0 got 17
Player 1 got Blackjack! (21)
 Player 1 beats the dealer!
Player 2 Busts! 24
Player 3 Busts! 22

Game 4
The dealer's face-up card has the value of 11
The players' scores are: 
14 19 7 
The Dealer's face-up card has the value of 11. And your current count is 14
You hit!
The Dealer's face-up card has the value of 11. And your current count is 21
Would you like to hit?
You chose to stand!

Player 0 got Blackjack! (21)
Player 1 got Blackjack! (21)
 Player 1 pushed with 21
Player 2 got 19
Player 3 got 17

The fraction of human wins was 0.5

Optional tasks:

  1. Create a different prescribed formula for the autonomous players, perhaps involving an element of randomness.

  2. Create a betting system (perhaps similar to gambler's ruin) where you can win or lose money each game. Getting a blackjack wins you 150% of your bet!

  3. Alter the game mechanics so that aces can be counted as 1 or 11.

  4. Implement another human decision such as split or double down.

  5. Instead of copy and pasting the game dynamics, create a method for the game mechanics. (This task would satisfy extension 5.1 Methodize It)

Submitting your work

To submit your work, contact the instructor or a TA. They will walk you through the submission process. Be prepared to show them the work that you have done and answer their questions about it!

Extension 3.7: Minesweeper (8 points)

Authors
Ron K. Cytron

You should see a minesweeper package in the extensions source folder.

This assignment is described in the book, exercise 1.4.30, on page 118. Begin by reading that exercise to make sure you understand the task assigned to you for this lab.

You may find the exercise online here, as Creative Exercise 30.

  • The file you will modify for this assignment is MineSweeper.java. It is already in the respository.

  • That file already prompts for the number of columns, rows, and the probability of a bomb.

    Do not change that part of the file. The file is very clear about where you are to insert your code.

  • Create the output as prescribed in the book's exercise.

You must use the \* and . characters as shown in the book. Otherwise, the visual version of this game (described below) will not work correctly.

Your output must include both the left and right parts of each line as described below.

The example given in the book is reproduced below:


* * . . .    * * 1 0 0
. . . . .    3 3 2 0 0
. * . . .    1 * 1 0 0

You must produce output that matches the form you see above:

  • Each line's left part displays the locations of the bombs (denoted by *) and the non-bombs (denoted by .).

  • Each line's right part reports a * where there is a bomb and the count of bombs that border that cell where there is not a bomb.

    For example:

    1. The leftmost entry of the second row has no bomb. In the left part of the second row, a dot is shown. Its corresponding entry in the right part of the second row shows the number 3, which is the sum of the bombs found on that cell's eight neighbors. Because this cell is left-most in the grid, some of its neighbors do not exist, but they are thus assumed to have no bombs.

    2. The mine field's central entry also has no bomb and shows a 2 in the right part of the output. Those two bombs can be found in the upper-left and lower-left cells with respect to that center cell's eight neighbors.

    The book provides a nice hint about an implementation that eliminates special cases around the edges of the field.

  • Run MineSweeper as a Java Application and be sure your results look correct before you demo.

    Test on very small (say, 3x2) mine fields at first. Enlarge the fields and test again, making certain the output is correct.

    Make sure it includes both the left and right parts of each line as described above.

  • When your program is complete (or, actualy, even prior to that), you can run a visual version of your game by running Game as a Java Application.

    • Our Game program runs your MineSweeper code, but hijacks the output for its own use.

    The output you produce is therefore the interface between:

    • Your code that computes the maze, in particular, the location of bombs, and

    • The class-provided code that runs the visual version of the game.

    That class-provided code has tried to be tolerant of the output you might produce. If it is not working for you, let us know.

    • It builds a visual board based on your output.

    • It also shows the output you produced in the console window.

    To play the visual version of the game:

    • Right-click on squares where you think there is a bomb.

    • Left-click on a square that has no bomb to show you the count of the number of bombs that border that square.

Submitting your work

To submit your work, contact the instructor or a TA. They will walk you through the submission process. Be prepared to show them the work that you have done and answer their questions about it!